A customer building the next generation synthetic aperture radar (SAR) faced challenges in delivering an enormous amount of processing power in a compact, lightweight solution. Read about the solution Curtiss-Wright developed here.

Curtiss-Wright was recently challenged to provide a direct CameraLink interface to a Kintex-7 FPGA without the need for ChannelLink transceivers, thereby allowing an existing “generic” digital FPGA solution to be used. Read about the solution we developed.

A major aircraft manufacturer needed to plan and operate a flight test campaign for a new regional airliner. Read about the solution Curtiss-Wright developed here.

High-performance storage solution for use on UAV with a minimum of 1TB of secure storage capacity to capture and store data and video from a variety of sensors.

A customer approached Curtiss-Wright with a requirement of upgrading to modern COTS hardware while keeping legacy proprietary infrastructure. Read about the SWaP solution Curtiss-Wright developed here.

In order to guarantee a high level of measurement reliability, the Air Force Institute of Technology (ITWL) sought to have sensor redundancy, with multiple strain gauges at each load measurement location. Learn about the solution.

This case study describes a crash-protected recorder designed by Curtiss-Wright to interface to a Data Management Unit (DMU) for a mid-range commercial airliner that had schedule challenges and changing requirements.

Download the case study to learn about the data acquisition solution that met the space requirements for a missile testing application.

NLR (National Aerospace Laboratory) helped the Royal Netherlands Air Force (RNLAF) instrument one of their 68 F-16’s with an upgrade data acquisition system designed around flexibility and minimizing space.

It is difficult to have a Commercial Off-The-Shelf (COTS) Data Acquisition System that fulfills both the robustness and channel density criteria - the Curtiss-Wright Acra KAM-500 fulfills both of these criteria using COTS equipment.

Curtiss-Wright was selected to provide its COTS data acquisition, networking and recording systems to the European Space Agency for the IXV which are qualified to meet requirements for space equipment such as radiation tolerance and high reliability.

The ACLS monitoring system required a number of distributed Data Acquisition Units (DAU) for both the OGA and CCA.