The KAD/ETH/101 is a full-duplex, fast Ethernet module. It can be used to program an Acra KAM-500 chassis or transmit data from an Acra KAM-500 chassis. This technical note describes how to set up the KAD/ETH/101 for programming and decommutating using a PC and is divided into the following sections:
- “29.1 Introducing the KAD/ETH/101” on page 1
- “29.2 Wiring the KAD/ETH/101” on page 1
- “29.3 Connecting the Acra KAM-500 chassis to a PC” on page 2
- “29.4 Connecting the PC and the Acra KAM-500 chassis to a network” on page 3
- “29.5 Using KSM-500 to configure the KAD/ETH/101” on page 4
- “29.6 Appendix” on page 10
- “29.7 Glossary” on page 12