The ACD/BAC/004 is an electroless nickel-plated, aluminum backshell for use with CON/KAD/003/CP mating connectors. 

The ACD/BAC/005 is an electroless, nickel-plated, aluminum backshell for use with CON/KAD/010 mating connectors. Backshell for KAD/TDC/107 (straight-through, heavy thermal mass).

Cold junction block for KAD/TDC/107 (built-in sensors, straight-through heavy thermal mass backshell) - 12ch

Cold junction block for KAD/TDC/102 (built in sensors, straight-through backshell) - 15ch.

The ACM/EXT/001 is used to extend the Acra KAM-500 backplane so that user-modules can operate external to (above) the Acra KAM-500 chassis. This card is intended as a debug tool for customers developing their own Acra KAM-500 user-modules.

The BAC/PSU/007 is the recommended backshell for CON/PSU/007 standard power supply unit mating connectors. The backshell helps to prevent wires from becoming frayed or damaged, while a clamp bar
provides strain relief.

Standard cables used for Acra KAM-500 and Axon system assembly.

The CON/KAD/002/SR is a modified 52-way Double-Density (DD) connector for use with the KAD/TDC/002.

CON/KAD/003/CP Mating Connector for KAM/TCG/102, KAM/TCG/103, and KAM/TCG/105.

The CON/KAD/004 is a 52-way Double-Density (DD) for use on jig assemblies as this connector mates with the CON/KAD/002/CP.

The CON/KAD/005/CP is a 52-way Double-Density (DD) connector for use with all Acra KAM-500 KAD modules (except the KAD/TDC/002).

The CON/KAD/005/SR is a modified 52-way Double-Density (DD) connector for use with the KAD/TDC/002.